🏠 Home → Software → Configurator
¶ ROSSMA Equipment Configuration Software
Description
This guide is intended to familiarize users with the main functions and capabilities of the ROSSMA IIOT-AMS Device Configurator software. The program allows remote configuration and obtaining information about ROSSMA IIOT-AMS equipment status using the LoRaWAN network server API.
Main program functions:
- Change device communication intervals.
- Request signal quality in LoRaWAN and NB-IoT networks.
- Configure Modbus protocol parameters
- Configure device discrete inputs
- Select profiles for polling technological devices connected to ROSSMA IIOT-AMS MODBUS switch.
- Display sent and received commands in program console.
Software updates are available on the official website www.rossma.ru in the "Product Information" section.
¶
LoRaWAN Network Server Connection Setup
To configure connection list, click the "wrench" icon in the main program window
Figure 1. ROSSMA IIOT-AMS Device Configurator interface
1.1. Create new or select existing server connection
1.2. Select network server type.
Currently supported LoRaWAN network server APIs:
- IOT Vega Server
- ROSSMA NETS
1.3. Fill in network server connection data
1.4. Click save
Figure 2. LoRaWAN network server connection settings
Figure 3. Server connection configuration interface
¶ General Settings
Figure 4. General settings configuration panel
¶ Custom Modbus Profile Configuration
Figure 5. Custom Modbus profile configuration interface
Note:
- After changing settings in any block, click the Send button to save changes to device (until reboot).
- After completing all parameter settings, click the Save button to permanently save selected settings.
¶ Discrete Input Configuration
Figure 6. Discrete input configuration settings